ø500
8
ø150
ø120
(取代)
ø570
20
钢粗加工用断屑槽
Chipbreaker for roughing of steel
PH/PX 断屑槽
PH/PX Chipbreaker
■加工案例
Case Studies
SUJ3
相当于SCM440 SCM440 class
330
・ 轴承 Bearing
・ Vc=130m/min
・ ap=5~6mm
・ =0.5mm/rev
・ 湿式 WET
・ CNMG190616PH
(CA5525)
ø1000
端面加工(黒皮)  Facing(with scale)
・ 接头 Connector
・ Vc=80m/min
・ ap=10mm(粗加工 roughing )
・ ap=3.8mm(精加工 finishing )
・ =0.7mm/rev
・ 干式 DRY
・ CNMG190616PH
(CA5525)
PH
其他公司涂层刀片A
(单面断屑槽)
Competitor A
16~28个/片
16〜28pcs/insert
8~14个/片
8〜14pcs/insert
PH
其他公司涂层刀片B
Competitor B
1.5个/角 1.5pcs/edge
1个/角 1pcs/edge
・ 与其他公司涂层刀片(单面断屑槽)A相比,PH断屑槽采用双面设
计,1片刀片相当其他公司2倍加工数量,降低了刀具费用。
・ PH chipbreaker doubled the number of processed workpiece due to double sided design
compared with the competitor A (single sided).
・ PH断屑槽与其他公司涂层刀片B相比,刀具寿命提高了1.5倍。
・ PH chipbreaker extended the tool life by 1.5 times of the competitor's coated insert B.
SNCM616
(根据用户评价)
Evaluation by the user
S45C
(根据用户评价) Evaluation by the user
800
・ 轴 Shaft
・ Vc=120m/min
・ ap=8mm
・ =0.35mm/rev
・ 湿式 WET
・ CNMM190612PX
(CA5515)
PX
其他公司涂层刀片C
Competitor C
有黑皮  With scale
18个/角以上 more than18pcs/edge
10个/角 10pcs/edge
・ 轴 Shaft
・ Vc=230m/min
・ ap=4mm
・ =0.5mm/rev
・ 湿式 WET
・ CNMM190612PX
(CA5515)
PX
其他公司涂层刀片D
Competitor D
1000
4个/片 4pcs/edge
2个/片 2pcs/edge
有黑皮  With scale
・ 其他公司涂层C在加工10个/刀尖后,刀片断屑槽的凸点已出现磨损。
・ PX断屑槽加工18个/刀尖时磨损量仍有限,还可继续加工。
・ For Comp. C, dots on chipbreaker were worn away after processing 10pcs/edge.
・ PX chipbreaker showed little wear even after processing 18pcs/edge and still available for
further processing.
・ PX断屑槽与其他公司涂层刀片D相比,寿命提高2倍。
・ PX chipbreaker showed two times longer tool life compared with Comp. D.
(根据用户评价)
Evaluation by the user
(根据用户评价)
Evaluation by the user
― 致力于生产效率提高的京瓷 ―
- KYOCERA, Contributing To Advancing Productivity -
机械工具事业本部
上海市浦东新区世纪大道211号 上海信息大楼11F(200120)
TEL:021-5877-5366 FAX:021-5877-1127
http://www.kyocera.com.cn/prdct/cuttingtool/index.html
切削工具相关咨询
●受理时间:9:00~11:45 12:45~17:45 ●周六、日以及法定节假日期间不受理业务。
CP202 CAT/15T0804TYO