3000
2000
●加工实例 Case Studies
・ 发电机组零件
特殊钢 Special Steel
Electric generator part
・ V=200m/min
・ N=637min -1
・ dxw=40 x 25mm
・ f=0.11mm/刃 tooth
・ F=420mm/min
・ 干式 Dry
・ MSR100R-2
・ 6刃列 6 edge lines
・ APMT250616ER-NB3
・ APMT250616ER-NB4
 (PR660)
MSR
其他公司刀具G
Competitor Cutter G
850mm(伸长量)
850mm(Over hang)
2个/1Hr(效率4倍)
2 pc/1Hr (Efficiency 4 times)
0.5个/1Hr
0.5 pc/1Hr
・相对于其他公司刀具加工1个工件需要2个小时, MSR加工1个工件只需要30分钟, 加工效
率达到4倍。
・Competitor Cutter G took 2 hours to machine 1 workpiece, but MSR can machine 1
workpiece by 30 min and machining efficiency is improved 4 times.
(根据客户评价) Evaluation from the user
SS400
FCD450
80
・ 面板 Plate
・ V=200m/min
(N=640min -1 )
・ dxw=80x10mm
・ f=0.06mm/刃 tooth
(F=230mm/min)
・ 干式 Dry
・ MSR100R-4(4段刃列样式)
4 stage type
・ 6刃列 6 edge lines
・ APMT250616ER-NB3
・ APMT250616ER-NB4
(PR660)
面板夹持力较弱
易发生振刀的情况下
Weak workpiece clamp and easy cause
of chattering
350mm(伸长量)
350mm(Over hang)
・ 建筑机械零件
Construction machine part
・ V=173m/min
(N=550min -1 )
・ dxw=5x50mm
・ f=0.2mm/ 刃 tooth
(F=660mm/min)
・ 干式 Dry
・ MSR100R-2
・ 6 刃 列 6 edge lines
・ APMT250616ER-NB3
・ APMT250616ER-NB4
(PR905)
1000
230mm(伸长量)
230mm (Over hang)
MSR
其他公司刀具H
Competitor Cutter H
切屑除去量=184cc/分
Chip evacuation = 184cc/min
切屑除去量=78cc/分
Chip evacuation = 78cc/min
MSR
其他公司刀具I
Competitor Cutter I
切屑除去量=165cc/分
Chip evacuation=165cc/min
切屑除去量=51cc/分
Chip evacuation=51cc/min
5
・相对于其他公司刀具〔 φ100(4枚刃)V=250m/min f=0.06mm/刃 (F= 200mm /min)
dXw=39X10mm〕切屑除去量=78cc/分, MSR由于切深量( d )很大, 切屑除去量为
184cc/分, 加工效率提高到2.3倍的同时, 切削音也非常安静。
・ Against chip evacuation = 78cc/min of Competitor Cutter H 〔Dia. 100mm(4 edges)
 V=250m/min f=0.06mm/tooth (F=200mm/min) dxw=39x10mm〕 since cutting
depth (d) is larger for MSR, chip evacuation is 184cc/min, then machining efficiency is
improved 2.3 times and realized quiet machining noise.
(根据客户评价) Evaluation from the user
・相对于其他公司刀具φ100 (6枚刃) V=90m/min f=0.2mm/刃(F=343mm/min) dXw
=3X50mm〕 的切屑除去量=51cc/分, MSR由于切深量 ( d ) 很大, 切屑除去量为165cc/分,
加工效率提高到3.2倍。
・Against chip evacuation = 51cc/min of Competitor Cutter I〔Dia. 100(6 edges) 
V=90m/min f=0.2mm/tooth(F=343mm/min) dxw=3x50mm〕 since cutting depth
(d) is larger for MSR, chip evacuation is 165cc/min, then machining efficiency is
improved 3.2 times.  
(根据客户评价) Evaluation from the user