Email:eva@mzgtool.cn
Zuhause
Drehfutter
Drehmeißel
Klinge drehen
Mühlenschneider
Fräser
Taps
Bohren
Sichel
Werkzeug
Kontakt
Neue Produktversion
MZG 10pcs 16IR 1.5TR 2TR TR ZM856 Threading Toolholders Indexable Carbide Screw Thread Inserts
2022-07-25 18:09:10 Source: Author: 【Big Medium Small】 Browse:9Times Comment:0Item

MZG 10pcs 16IR..TR 22IR..TR Stainless Steel Internal Threading Toolholders Indexable Carbide Screw Thread Inserts

1.MZG Tungsten Carbide Inserts Item Specifics

MZG Tungsten Carbide Inserts Specification Parameter



Specification           Material                    Application

16IR2.0TRZM856Stainless Steel Processing

2.MZG Tungsten Carbide Inserts Product Photo

3.MZG Tungsten Carbide Inserts Packing Info

Insert Packing Info

4.MZG Tungsten Carbide Inserts Parameter

MZG CNC Tool Insert Material Introduce

1.Coated Carbide(CVD)
  1. Applicable from low to high speed cutting and from finishing to roughin.

  2. Stable cutting is achieved due to the superior toughness and crack resistance.

  3. Cutting times are reduced due to good chip control from effective chipbreakers.

Achieving superior processing efficiency in the field of a wide range of steel/casting Parts processing.
ZC2501  ZC2502: suitable for low speed machining of steel part
ZC2511  ZC2512: suitable for high speed machining of steel part
ZK3511S: suitable for hihg speed machining of cast iron part
2.Coated Carbide(PVD)
  1. Good for low to high speeds and finishing to heavy roughing cutting.

  2. Stable cutting with excellent toughness.

  3. Smooth fine surface of PVD coated carbide provides good surface finish and high.

Achieved high reliability in the unstable processing field of stainless steel
ZP1521: suitable for high speed machining of stainless steel
3.Cermet
  1. Excellent wear resistance enables high cutting speeds

  2. Cermet maintains good surface finished due to the low affinity to workpiece material.

  3. Excellent wear resistance enables high cutting speeds.

ZN60: suitable for steel/cast finish processing
4.Carbide
  1. Tough and Hard, good thermal conductivity

  2. Suitable for cutting non-ferrous metals and non-metals

  3. Stable cutting at low cutting speeds, including milling operations

ZK10: suitable for Cutting Aluminum Al non-ferrous processing
5.CBN
  1. Superior wear resistance when cutting hard materials

  2. Suitable for high speed cutting of cast iron and sintered steel

  3. High thermal conductivity provide stable cutting

CBN-S: suitable for difficult cutting material processing
CBN-K: suitable for cast iron processing
6.PCD (Diamond Sinter)
  1. Applicable for non-ferrous metals, non-metals turning milling and other various type of cutting .

  2. Reduced edge build-up allows for high precision cutting.

  3. Diversified applications for cutting of non-ferrous metals and non-metals.

  4. Finished surface will be rainbow colored.(a mirror-like finished surface will not be obtained when single crystal diamond is used.)

PCD: suitable for cast iron processing


Big Middle Small】【PrintingTraditional】【Contribute】 【Collection】 【Recommend】 【Report】 【Comment】 【Close】【Go Top
Articles List
Newest Commentary Hotspot
Hot Topics     More>>